Local Lapidary Services

Rubble Rock And Gem offers local re-cutting services. We offer recutting of colored faceted stones (no diamonds). If you have a gem that has become scuffed and hazy, let us take care of it for you.

Rates:

Delivery/Pick up

You may drop off/ pick up your stone in person any time during our regular business hours. We will also ship your stone to you once recutting is complete, but this will be at your expense. If a courier is to be arranged, we ask that you arrange it. We do not offer delivery or pick up services at this time.

Waiver

Please note that what you may think is an easy task may not be so easy. Often wear and tear on stones causes deformation. In faceting, fractions of millimeters count, and so if the abrasion is too severe, the damage is often underestimated by the public and jewelers. We do our best to repair the stones, and understand their sentimental value. We recut to maximize the carat, while maintaining the same cut style to the best of our ability. Because of the nature of faceting, it takes an expert to decipher what is necessary to repair the stone. By agreeing to our service, you are agreeing to let the experts do their work to the best of their ability and trusting that the final finish they provide is the best outcome possible for the stone and your request.

Coming Soon

Stone Drilling is done locally in house at rubble rock and gem. If your gemstone is rough, or polished, we can drill it. If it is transparent or opaque, we can drill it. If you need a hole for a chain or wire to go through, or need a hole drilled so you can make a stone into a ring or bangle- we can do it.

*Depth matters. The average gemstone is about 4 or 5mm. If your stone is thicker, like a raw crystal, the cost double’s because thicker stone requires transitioning between 3 to 6 different types of drills to create a clean hole.

*Rush Jobs price is doubled

Notes

Glass and seashell are treated same as stone 20% Discount for 10 or more stones Drilled holes will not be polished inside Stones smaller than 1 cm may be rejected

Disclaimer: All rocks are different, many have flaws, we are pretty good and rarely break stones. If a stone breaks while drilling, Rubble Rock and Gem is not liable. No charge will be incurred on either side if the stone breaks. Drilling is meant to be a forming process, meant for initial lapidary stages (before sanding). Drilling a polished stone will leave marks- mostly at the exit point where the drill bit breaks through the reverse of the stone. This “blowout’ is difficult to avoid, and may occur on some of your stones.